All Categories > Industrial Products > Engineering Composite Materials > Fiberglass Reinforced Polyester (FRP) > Glastherm-HT and Glastherm-S (Up to 550ºF Fiberglass Reinforced Polyester Composite Boards) > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Glastherm-HT and Glastherm-S (Up to 550ºF Fiberglass Reinforced Polyester Composite Boards)

Check up to five results to perform an action.

GLASTHERM® brand thermal insulating sheet is an excellent choice for mold insulation applications. Glastherm sheet offers significant advantages when compared with other materials such as mica, asbestos concrete or calcium silicate. Glastherm sheet is an efficient thermal barrier. It is strong in order to resist the effects of molding pressure and rough handling. It is resistant to oil and water absorption, and is completely asbestos-free.
MOLD INSULATION
A major profit constraint in the molding and casting of rubber, plastics and metals continues to be the cost of energy. Managers who are concerned with the current and forecasted price of electricity, natural gas, and oil are focusing on methods which will reduce energy consumption. Installing or upgrading thermal insulation in curing presses and molds is one relatively easy and inexpensive way to achieve important energy savings.
In order to cure or "freeze" a resin or compound, molding equipment is almost always dependent upon heated or cooled zones Glastherm sheet reduces energy consumption by minimizing a wasteful flow of energy between these zones.
In the past, little or no insulation has been used in or around molds. Where it was used, the insulation was often a thin sheet of asbestos-reinforced concrete (e.g. Transited®). Although inexpensive, asbestos-reinforced concrete is a poor thermal barrier and is so brittle that it is easily damaged. It readily absorbs oil and water, further reducing its value as an insulating material. Asbestos concrete also tends to compress after a period of time in use. This can be a problem where parallelism between mold halves is important. Alternatives to asbestos concrete, such as calcium silicate (e.g. Marinite®) and mica, also have drawbacks. Calcium silicate is highly absorbent and has very poor compressive strength. Mica has poor long-term compressive strength and is expensive. Insulating material for today's needs must have:
  • Low thermal conductivity
  • High compressive strength at process temperatures
  • Excellent control of thickness dimension
  • No asbestos or other toxic materials
  • Ability to withstand rough handling during mold changes
Glastherm sheet provides all of these features. It is a fiberglass reinforced, mineral filled sheet bonded together with heat resistant thermosetting resins. This highly durable composite is then precision finished to close dimensional tolerances. It has less than half the thermal conductivity of asbestos concrete and is rugged enough to provide years of service.
When installed on the base of a mold. Glastherm sheet will reduce heat transfer between mold and press platen. This also results in more even temperatures within the mold. Another benefit, in the case of heated molds, is that less plant ventilation will be needed.




Compare Items
   
  Results 1 - 2 of 2 1 

Item #

Maximum Service Temperature

Thermal Conductivity

Coefficient of Thermal Conductivity Across Thickness

Coefficient of Thermal Conductivity Across Surface

Grade S 425 ºF 1.8 BTU-in/hr-ft²-ºF 7.02 x 10-5 in/in/ºF 1.10 x 10-5 in/in/ºF
Grade HT 550 ºF 1.9 BTU-in/hr-ft²-ºF 6.43 x 10-5 in/in/ºF 1.24 x 10-5 in/in/ºF
  Results 1 - 2 of 2 1 
twitterfacebookFlickrLinked InSite created by ThomasNet Web Solutions and powered by Navigator Platform
Foundry Service & Supplies, Inc. | Heat And Corrosion Resistant Industrial Insulation & Construction Materials