All Categories > Industrial Products > Ceramic Fiber Insulation & Accessories > Board Products > Kaowool Low-Temperature Boards (2300ºF - 2400ºF Insulation & Structural Boards) > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Kaowool Low-Temperature Boards (2300ºF - 2400ºF Insulation & Structural Boards)

Check up to five results to perform an action.

Thermal Ceramics vacuum formed products are a rigid self-supporting finer insulation manufactured from a slurry consisting of Kaowool ceramic fibers and binders. Thermal Ceramics products offer excellent thermal conductivity, strength and thermal stability at elevated temperatures. Thermal Ceramics products have the capability to withstand chemical attack. Exceptions include hydrofluoric acid, phosphoric acid, and strong alkalies. A small amount of combustible binder will burn out at approximately 300ºF. Additional hardness and strength can be achieved with post treatments. Board capabilities are 48 x 36 x 1/4 to 3" with the exception of PM Board which can be made 1/8" thick.

Kaowool PM is manufactured to close tolerances with an excellent surface finish. Kaowool PM has a good thermal conductivity and can easily be die-cut.

Kaowool M is a low cost general duty insulation product available in a variety of sizes and thicknesses. Kaowool M is a rigid self-supporting product that can be produced in different strength ranges to fit individual applications.

Kaowool S is a higher strength product with good non-ferrous molten metal resistance.

Kaowool HD is a low cost high strength product recommended for tough mechanical stress areas. Also, very good for back-up behind dense refractories.

Kaowool HS is a high strength product recommended for tough mechanical stress areas. Also, very good for back-up behind dense refractories.

Kaowool HS45 is designed for a temperature rating of 2400ºF with very high compressive and flexural strengths. Each board is machined to a thickness tolerance +1/4 - 1/16". Kaowool HS45 is non-wetting to molten aluminum metal and exhibits good resistance to chemical attack.




Compare Items
   
  Results 1 - 6 of 6 1 

Item #

Color

Nominal Density

Maximum Temperature Rating

Continuous Use Limit

Modulus of Rupture

Kaowool PM White 15 lb/ft³ 2300 ºF 2100 ºF 175 to 250 psi
Kaowool M Beige 17 lb/ft³ 2300 ºF 2000 ºF 100 to 130 psi
Kaowool S Brown 20 lb/ft³ 2300 ºF 2000 ºF 150 to 180 psi
Kaowool HD Beige 26 lb/ft³ 2400 ºF 2300 ºF 150 to 175 psi
Kaowool HS Beige 28 lb/ft³ 2300 ºF 2200 ºF 230 to 260 psi
Kaowool HS-45 White 42 lb/ft³ 2400 ºF 2400 ºF 450 to 550 psi
  Results 1 - 6 of 6 1 
twitterfacebookFlickrLinked InSite created by ThomasNet Web Solutions and powered by Navigator Platform
Foundry Service & Supplies, Inc. | Heat And Corrosion Resistant Industrial Insulation & Construction Materials