All Categories > Industrial Products > Cement Boards > Transite > Item # Transite-HT  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # Transite-HT, Transite-HT (600ºF Fiber Reinforced Cement Board)



Transite boards are high density fiber reinforced cement boards capable of withstanding high temperatures, loads, and electrical conditions with less shrinkage and degradation as compared to previous non-asbestos formulas. Transite is hydraulically pressed into monolithic boards from portland cement and selected non-asbestos, non-ceramic/refractory fibers. The board is then air-cured (Transite-HT) or oven-cured (Transite-1000) for exceptional machinability, and sanded to a standard 24 grit finish. The materials are non-combustible and can withstand operating temperatures of up to 1000ºF. Transite has low thermal conductivity, so works well for many structural insulating applications. It is non-conductive and will not rot or mold when exposed to prolonged dampness. The materials can be cut and machined with standard carbide shop tools.




Specifications  · Applications

Specifications

Composition

Monolithic non-asbestos fiber cement

Density

100 lb/ft³
1602
kg/m³

Maximum Operating Temperature

600 ºF
315
ºC

Compressive Strength

10400 psi
731
kg/cm²

Modulus of Rupture

2600 psi
183
kg/cm²

Water Absorption

21 %

Thermal Conductivity at 250ºF (121ºC)

2.40 BTU-in/hr-ft²-ºF
0.34
W/m-ºK

Arc Resistance

View
200 sec

Dielectric Strength

View
35 V/mil

Sheet Size

48-5/8 x 96-5/8 in
1235 x 2454
mm

Available Thickness

1 in
1/2
in
1-1/2
in
2
in
3
in
3/4
in


Applications
Transite has exceptional machinability, so is capable of being machined into extremely intricate parts with excellent surface finish. Applications include load-bearing gaskets, press platen insulation, welding and high-temp. machine guards, laboratory bench tops and fume hood liners, bus bar supports, transformer spacers, electrical coil supports, arc shields, foundry core plates and blower boards, induction and metal-holding furnace tops/bottoms/sides and parts, oven shelving, soldering plates, molten metal splash guards, and welding shields.



 MORE IMAGES 

·  Cement Boards


 DOWNLOADS 

Transite-HT
(PDF, 431KB)


twitterfacebookFlickrLinked InSite created by ThomasNet Web Solutions and powered by Navigator Platform
Foundry Service & Supplies, Inc. | Heat And Corrosion Resistant Industrial Insulation & Construction Materials