All Categories > Industrial Products > Engineering Composite Materials > Polyimide Composite Materials > Wearcomp (Long Graphite Fiber Reinforced Polyimide Composite: Up to 850ºF)  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Wearcomp (Long Graphite Fiber Reinforced Polyimide Composite: Up to 850ºF)



Wearcomp is an ultra high strength, high temperature carbon fiber reinforced thermoset Polyimide composites with unmatched strength-to-weight ratios. Some of the outstanding properties of these materials include: high temperature resistance, self lubricating, high impact strength, excellent corrosion resistance, low wear, light weight, and good dimensional stability.




General Information  · Specifications  · Note

General Information

Matrix

Polyimide Resin

Reinforcement

Carbon Fiber

Fiber Length

1” Ave.

Specific Gravity

1.55

Available Forms

Custom Molded
Machined Parts

Plates

Rods

Tubes


Specifications

Density

98 lb/ft³

Compressive Strength at 73ºF

104000 psi

Compressive Strength at 500ºF

69000 psi

Flexural Strength at 73ºF

80000 psi

Flexural Strength at 500ºF

75000 psi

Flexural Modulus at 73ºF

5600000 psi

Flexural Modulus at 500ºF

5200000 psi

Tensile Strength at 73ºF

49000 psi

Tensile Strength at 500ºF

41000 psi

Tensile Modulus at 73ºF

5700000 psi

Tensile Modulus at 500ºF

5200000 psi

IZOD Impact Strength (Notched) at 73ºF

12 ft lb/in

Coefficient of Friction (Unlubricated Against Steel)

0.15 to 0.20

Limiting PV (Unlubricated Against Steel)

80000

Maximum Operating Temperature

850 ºF

Continuous Operating Temperature

600 ºF

Coefficient of Linear Thermal Expansion - Parallel

15 x 10-6 in/in/ºF

Coefficient of Linear Thermal Expansion - Perpendicular

2.0 x 10-6 in/in/ºF

Thermal Conductivity

8.3 BTU-in/hr-ft²-ºF

Chemical Resistance

Excellent (Strong Bases w/pH > 10 Not Recommended)

Machinability

Good

Maximum Sheet Size

20 x 30 in


Note
The Wearcomp properties listed represent typical average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations. They are supplied as a technical service and are subject to change without notice. Check with your supplier to assure current information



 MORE IMAGES 

·  Wearcomp Bushing Blanks

·  Wearcomp Polyimide


 DOWNLOADS 

Data Sheet for Wearcomp (Long Graphite Fiber Reinforced Polyimide Composite: Up to 850°F)
(PDF, 24KB)


twitterfacebookFlickrLinked InSite created by ThomasNet Web Solutions and powered by Navigator Platform
Foundry Service & Supplies, Inc. | Heat And Corrosion Resistant Industrial Insulation & Construction Materials