All Categories > Industrial Products > Cements, Coatings, & Mortars > High Temperature Cements > Morco Fibrous Adhesive (3000ºF Economical Ceramic Fiber Based Adhesive)  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Morco Fibrous Adhesive (3000ºF Economical Ceramic Fiber Based Adhesive)



Type
An air-setting adhesive of thin consistency and high surface tension, designed primarily for applying ceramic wool modules to both vertical and horizontal surfaces and for cementing ceramic fiber boards and blankets to each other or to other refractory surfaces.

Air setting
Packed in 80 lb. or 55 lb. plastic pails.

Typical Test Data
According to ASTM Standard Test Methods, where applicable.






Specifications

Pyrometric Cone Equivalent (PCE)

31 to 32

Temperature Equivalent

3061 to 3123 ºF
1683 to 1717
ºC

Limit Use

3000 ºF
1650
ºC

Chemical Analysis

Alkalies (Na2O - K2O) - 4.7%
Alumina (Al2O3) - 45.1%

Calcium oxide (CaO) - 0.2%

Ferric Oxide (Fe2O3) - 1.6%

Magnesia (MgO) - 0.1%

Silica (SiO2) - 46.4%

Titania (TiO2) - 1.9%

Refractoriness Test (2910ºF - 1600ºC)

Passes

Bond Strength After Drying (230ºF - 1600ºC)

150 to 300 lb/in²
11 to 21
kg/cm²

Particle Size

Complies with ASTM C178 requirements for mortars.

Approx. Amount Required to Lay 1000 Brick

350 lb
158
kg

Applications

Troweled onto surface of module - approximately 1/2 to 3/4 lb./sq ft.


 DOWNLOADS 

Data Sheet for Morco Fibrous Adhesive (3000ºF Economical Ceramic Fiber Based Adhesive)
(PDF, 44KB)


twitterfacebookFlickrLinked InSite created by ThomasNet Web Solutions and powered by Navigator Platform
Foundry Service & Supplies, Inc. | Heat And Corrosion Resistant Industrial Insulation & Construction Materials