All Categories > Industrial Products > Cements, Coatings, & Mortars > High Temperature Cements > Cal-Stik (1000ºF+ Calcium Silicate Based Adhesive)  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Cal-Stik (1000ºF+ Calcium Silicate Based Adhesive)



Super Calstik is a modified, silicate-based glue. It sets quickly to provide a high temperature bond for porous insulating materials. Super Calstik is completely asbestos free.




Wet Properties  · Drying Time on Calcium Silicate Insulation  · Physical Properties  · Chemical Resistance  · Storage and Application Limitations  · Applications

Wet Properties

Density

12 lb/gal
1440
kg/m³

Solids by Weight

62 %

pH

12.8

Viscosity-Brookfield

7200 to 8500 cps

Wet Coverage

0.8 mm, 1.23 m2/liter
1.6 mm, 0.61 m2/liter

1/32" thick, 50 sq. Ft./gallon

1/16" thick, 25 sq. Ft./gallon


Drying Time on Calcium Silicate Insulation

Drying Time

View
77 ºF
25
ºC

Set

15 sec

Handles

5 min

Thorough Dry

1-1/2 hrs

Minimum Application Temperature for Thorough Dry

35 ºF
2
ºC


Physical Properties

Melt Point at Decomposes

1088 ºF
587
ºC

Minimum Shore "C" Hardness - 24 Hour Care

65

Resistance to Cracking

View
0" - 1/4 Wedge - No Cracking
0" - 1/8 Wedge - No Cracking

Elongation-10 Day Cure

2 %

Shrinkage - 10 Day Cure

1 %

Tensile Strength

3000 psi
20685
kPa

Adhesion to Calcium

Silicate Insulation Falls Before Glue Line Joint


Chemical Resistance

Non-Aqueous Solvents

Excellent with Aromatic, Aliphatic and Oxygenated Solvents

Mineral Acids

Salt Formation and Loss of Bond Strength

Water-Cold

Softens Upon Lengthy Submersion

Water-Hot

Softens Upon Continuous Contact


Storage and Application Limitations
Do Not Store Below 35ºF (2ºC) (Wet Product) - Freezes
Do Not Store Above 95ºF(35ºC) (Wet Product) - Bodies Up
Freeze-Thaw Stability (Wet Product) - No Cycles
Maximum Recommended Continuous
Service Temperature (Dry Product) - 1000ºF(538ºC)
Fire Resistance (Dry Product) - Passes 1200ºF(649ºC) Oven Without Charring
Effect on Metal (Dry Product) - Non-Corrosive
Removal from Surfaces
Immediately Use Hot Water and Soap Before It Dries



Applications
Super Calstik is used for bonding and sealing joints in super Firetemp® high temperature insulation and calcium silicate pipe and block insulation. It is used in grease ducts, structural steel and other fire-rated applications.



 DOWNLOADS 

Data Sheet for Cal-Stik (1000°F+ Calcium Silicate Based Adhesive)
(PDF, 53KB)


twitterfacebookFlickrLinked InSite created by ThomasNet Web Solutions and powered by Navigator Platform
Foundry Service & Supplies, Inc. | Heat And Corrosion Resistant Industrial Insulation & Construction Materials