All Categories > Industrial Products > Engineering Composite Materials > Micarta Industrial Laminates (High Pressure Laminates) (NEMA Rated Sheets, Tubes, and Rods) > Item # 400  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # 400, Plate



Micarta is a line of Industrial High Pressure Laminates available in sheets and tubes. The materials are constructed from a base reinforcement material laminated using one of several resin systems. Like other building materials, Micarta comes in a number of standard shapes and panels. Flat sheets are manufactured up to 16 inches in thickness and in sizes up to 5 feet by 12 feet. There are more than 1500 standard round, rectangular, square and elliptical Micarta convolute tubing products available. These are available with a range of inside and outside diameters, wall thicknesses and lengths. There is also a choice of oil, sanded or special finishes. Filament-wound tubing is available with up to 60 inch inside diameters, wall thicknesses up to 3 inch, in lengths up to 20 feet. Shapes other than cylindrical can be manufactured. A wide range of molded structural rods, angles, channels and zees of various materials and dimensions are available. Micarta materials meet or exceed all applicable NEMA requirements.




Specifications  · Micarta Industrial Uses

Specifications

Specification Number & Type

Mil-P-5431, MPR-400

Construction Resin & Substrate

Phenolic/Canvas/Graphite

Color

Green

Plate Size

36 x 48 in
36 x 72
in
48 x 108
in
48 x 48
in
48 x 96
in

Nominal Thickness

0.031 to 5 in for (36 x 72 in Plate Size)
0.031 to 5 in for (36 x 48 in Plate Size)

0.031 to 5 in for (48 x 48 in Plate Size)

0.031 to 5 in for (48 x 96 in Plate Size)

0.031 to 5 in for (48 x 108 in Plate Size)

Molded Nominal Thickness

1/32 in (± 0.0065)
3/64 in (± 0.0075)

1/16 in (± 0.0075)

3/32 in (± 0.009)

1/8 in (± 0.010)

5/32 in (± 0.011)

3/16 in (± 0.0125)

7/32 in (± 0.014)

5/8 in (+ 0.053)

3/4 in (+ 0.058)

7/8 in (+ 0.062)

1 in (+ 0.065)

1-1/4 in (+ 0.073)

1-1/2 in (+ 0.081)

1-3/4 in (+ 0.089)

2 in (+ 0.097)

1/4 in (+ 0.030)

5/16 in (+ 0.035)

3/8 in (+ 0.040)

7/16 in (+ 0.044)

1/2 in (+ 0.048)


Micarta Industrial Uses
  • Super collider
  • Cryogenic pumps & vacuums
  • Rocket propellant containers
  • Space shuttle cargo bay
  • Military aircraft ejection seats
  • Radomes
  • Missle nose cones
  • Mass Transit
  • Medical imaging equipment
  • Submarine damping systems
  • Turbines
  • Voltage generators
  • Electrical panels
  • Power circuit breakers
  • Antennas
  • Compound archery bows
  • Paper industry
  • Ball bearing retainers
  • Textile bobbins
  • Automotive industry
  • Radio-controlled model cars




 MORE IMAGES 

·  Machined Engineering Composites

·  Machined-Engineering-Composites-2

·  Machined FRP Parts-2

·  Micarta Tubes

·  Paper Phenolic Grade-X

·  Phenolic Sheet

·  Round - Rectangular Composite Tubing


 DOWNLOADS 

Data Sheet for Micarta Industrial Laminates (High Pressure Laminates) (NEMA Rated Sheets, Tubes, and Rods)
(PDF, 198KB)

Micarta® Plates Electrical Properties
(PDF, 285KB)


twitterfacebookFlickrLinked InSite created by ThomasNet Web Solutions and powered by Navigator Platform
Foundry Service & Supplies, Inc. | Heat And Corrosion Resistant Industrial Insulation & Construction Materials