All Categories > Architectural Products > Corrugated Fiber Cement Boards > Corrugated Fiber Cement Boards > Item # Profile-6  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # Profile-6, Corrugated Fiber Cement Boards



Profile 6 and safety in roof work
When correctly installed, Profile 6 has been tested and classified as non- fragile, and must be considered when working to the roof safety requirements of HSG 33. In addition, Profile 6 has also passed the French and Danish standards with flying colours.
Profile 6 is a high strength fibre cement sheet with polypropylene reinforcement strips inserted along precisely engineered locations which run for the full length of the sheet in each corrugation. This provides maximum reinforcement strength with no loss of durability in service.
Profile 6 sheet lengths (mm)
1525, 1675, 1825, 1975, 2125, 2275, 2440, 2600, 2750, 2900, 3050.
Farmscape lengths (mm)
1525, 2440, 2900





Specifications  · Applications  · Which Profile?

Specifications

Composition

Non-Asbestos Fiber Cement

Sheet Length

8 ft
10
ft
12
ft
96
in
120
in
144
in
2440
mm
3050
mm
3660
mm

Sheet Width

42.8 in
1086
mm

Available Thickness

17/64 in
6.7
mm

Minimum Roof Pitch

5 º

Accessories

View
item-1604, Two Piece Close Fitting Ridge
item-1605, Two Piece Ventilating Ridge
item-1606, Two Piece Plain Wing Ridge
item-1608, Eaves Corrugation Closure
item-1609, Eaves Filler
item-1610, Apron Flashing
item-1611, Roll Top Barge Board
item-1612, External Corner
item-1613, Horizontal Flashing Piece


Applications
Corrugated fiber cement boards can be used on new construction or remodeling as roofing or cladding on commercial, residential, agricultural, or industrial buildings, as well as hangers. These non-asbestos sheets can be used to replace old asbestos or metal sheets.



Which Profile?
The decision to use Profile 3 or Profile 6 sheets will depend largely upon the following four criteria:

1. The scale of the building in question.
2. Compatibility with any existing materials.
3. The distance from centre to centre of the horizontal fixing railsor purlins.
4. Whether or not the roofing material is to be classified as non-fragile.

Reference should therefore be made to the sheet sizes, fixing detailsand product data provided in this leaflet before deciding which type ofprofiled sheeting to use.



 DOWNLOADS 

Profile-6 with Transite
(PDF, 1454KB)

Profile-3/6 Design Guide Part 1
(PDF, 13066KB)

Profile-3/6 Design Guide Part 2
(PDF, 4155KB)


twitterfacebookFlickrLinked InSite created by ThomasNet Web Solutions and powered by Navigator Platform
Foundry Service & Supplies, Inc. | Heat And Corrosion Resistant Industrial Insulation & Construction Materials