All Categories > Architectural Products > Corrugated Fiber Cement Boards > Corrugated Fiber Cement Boards > Item # Profile-3  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # Profile-3, Corrugated Fiber Cement Boards



Non-combustible corrugated fiber cement boards. Profile 3, Profile 6, and Profile-8 are differentiated by the size of corrugation in the sheets; Profile 3 having the smallest corrugations, Profile-8 in the middle, and Profile-6 having the largest corrugations. All 3 sheets are manufactured from a selected blend of Portland cement and water, while being reinforced with a mixture of both natural and synthetic fibers. Corrugated fiber cement boards offer the following benefits for roofing or siding:
  • Highly cost effective weatherproofing
  • Virtually maintenance free
  • No rust, rot or corrosion
  • Resistant to chemical attack
  • Vapour permeability reduces condensation
  • Excellent noise and thermal insulation
  • Quick and easy to install and fix
  • Wide product and color range
Profile 3 and Profile 6
Marley Eternit, the Country's largest manufacturer of fibre cement products, has been producing profiled sheeting for over 90 years. Today, we offer two ranges of profiled sheeting - Profile 3 and Profile 6 - to a wide range of customers. The products are differentiated by the size of corrugation in the sheets; Profile 3 having smaller corrugations than Profile 6.
Both types of sheet are manufactured from a selected blend of Portland cement and water. This is reinforced with a mixture of both natural and synthetic fibres. The longevity of this formulation has enabled Marley Eternit to offer a 30 year guarantee on our sheets and fittings (available on request).
Marley Eternit have always worked to improve safety when using our range of roofing and cladding products. Building upon over 90 years experience in the UK roofing industry we have developed a purpose designed, reinforced fibre cement sheet - Profile 6 - that meets the high standards of safety in roofing work set out in the Health and Safety Executive document ‘Health and Safety in Roof Work’ (HSG 33). In addition to the Profile 6 sheet, we are proud to be able to offer a complementary range of accessories that meet the same high standards of safety.
Eternit fibre cement profiled sheeting is manufactured in accordance with a quality system registered under BS EN ISO 9001. They also hold British Board of Agrément Certificate No. 00/3700.

Other products
In order to ensure full compliance with HSG 33, ridges and rooflights must also be upgraded. Marley Eternit can supply a full range of fittings to ensure that the complete roof is non-fragile





Specifications  · Applications  · Which Profile?

Specifications

Composition

Non-Asbestos Fiber Cement

Sheet Length

96 in
120
in
2440
mm
3050
mm

Sheet Width

30.8 in
782
mm

Available Thickness

7/32 in
5.8
mm

Minimum Roof Pitch

10 º

Accessories

View
item-1602, Cranked Crown Sheet
item-1603, Ventilating Crank Crown
item-1604, Two Piece Close Fitting Ridge
item-1605, Two Piece Ventilating Ridge
item-1606, Two Piece Plain Wing Ridge
item-1607, Hooded Two Piece Ridge Finial
item-1608, Eaves Corrugation Closure
item-1609, Eaves Filler
item-1610, Apron Flashing
item-1611, Roll Top Barge Board
item-1612, External Corner
item-1613, Horizontal Flashing Piece


Applications
Corrugated fiber cement boards can be used on new construction or remodeling as roofing or cladding on commercial, residential, agricultural, or industrial buildings, as well as hangers. These non-asbestos sheets can be used to replace old asbestos or metal sheets.



Which Profile?
The decision to use Profile 3 or Profile 6 sheets will depend largely upon the following four criteria:

1. The scale of the building in question.
2. Compatibility with any existing materials.
3. The distance from centre to centre of the horizontal fixing railsor purlins.
4. Whether or not the roofing material is to be classified as non-fragile.

Reference should therefore be made to the sheet sizes, fixing detailsand product data provided in this leaflet before deciding which type ofprofiled sheeting to use.



 DOWNLOADS 

Choosing and Using Profile-6/3
(PDF, 3519KB)

Profile-3/6 Design Guide Part 1
(PDF, 13066KB)

Profile-3/6 Design Guide Part 2
(PDF, 4155KB)


twitterfacebookFlickrLinked InSite created by ThomasNet Web Solutions and powered by Navigator Platform
Foundry Service & Supplies, Inc. | Heat And Corrosion Resistant Industrial Insulation & Construction Materials