All Categories > Industrial Products > Cast & Fired Ceramics > Fused Silica Foam-50 (2500ºF+ Low Expansion 50 pcf Insulating Foam Block)  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Fused Silica Foam-50 (2500ºF+ Low Expansion 50 pcf Insulating Foam Block)



Fused Silica Foam-50 is characterized by a uniform open cell structure with excellent thermal insulating properties, exceptional resistance to thermal shock, and volume stability over a wide temperature range. The material is capable of being machined to close tolerances using standard carbide tooling. When faced with fused silica cement or other suitable mortars. Foam-50 can withstand moderate working face conditions including trough linings for molten aluminum, copper, and other non-ferrous alloys. Standard block size is 4.5" x 12" x 18" (other sizes by request). Fused Silica Foam-30 is also available from Foundry Service on a special order basis. Foam -30 is a 30 pcf version of ceramic foam.




Specifications  · Note  · Applications

Specifications

Standard Block Size

4.5 x 12 x 18 in

Bulk Density

50 lb/ft³
0.80
g/cm³

Porosity

85 %

Modulus of Rupture at 2000ºF (1093ºC)

750 lb/in²
55
kg/cm²

Cold Crushing Strength

2000 lb/in²
140
kg/cm²

Coefficient of Thermal Expansion to 1830ºF (1000ºC)

0.4 Per ºF
0.7
Per ºC

Thermal Conductivity at 500ºF (260ºC)

1.0 BTU-in/hr-ft²-ºF
0.14
W/m-ºK

Thermal Conductivity at 1000ºF (540ºC)

1.4 BTU-in/hr-ft²-ºF
0.20
W/m-ºK

Thermal Conductivity at 1500ºF (816ºC)

1.7 BTU-in/hr-ft²-ºF
0.24
W/m-ºK

Thermal Conductivity at 2000ºF (1093ºC)

2.8 BTU-in/hr-ft²-ºF
0.40
W/m-ºK

Chemical Analysis (Ignited)

Al2O3 - 0.4%
Alkalies - Trace

CaO - 1.4%

Fe2O3 - 0.1%

MgO - Trace

SiO2 - 98%


Note
All mechanical properties were determined at room temperature. These are laboratory results typical of the material and are subject to normal manufacturing variations. They are supplied as a technical service only.



Applications
The volume stability of insulating Foam-50 allows for production of large shapes which can be used in severe cyclic conditions up to around 2000ºF. Because it's such a good heat barrier, fuel economy will result from the use of Foam-50 as compared to conventional refractories and castables. The large size capability coupled with the ease of fabrication allows for great freedom in engineering and design. Foam-50 blocks can be easily joined with fused silica cement. The material has high chemical purity, good acid resistance, excellent electrical resistance, and is unaffected by nuclear radiation. Typical applications include furnace door, roof, and wall insulation, aluminum trough liners, reflectors for quartz lamps and infrared heaters, tooling for aerospace and glass forming operations, brazing fixtures, gas uptake liners, and thermal barriers for nuclear applications.

Foundry Service is capable of casting, fabricating, and machining Foam-50 to exact customer specifications. Fax or e-mail your requirements today.



 DOWNLOADS 

Data Sheet for Fused Silica Foam-50 (2500°F+ Low Expansion 50 pcf Insulating Foam Block)
(PDF, 11KB)


twitterfacebookFlickrLinked InSite created by ThomasNet Web Solutions and powered by Navigator Platform
Foundry Service & Supplies, Inc. | Heat And Corrosion Resistant Industrial Insulation & Construction Materials