Calcium Silicate Boards
Ultratemp - Calcium Silicate Insulation Boards
Item # Ultratemp-AL
Email This Page
Save To Favorites
Item # Ultratemp-AL, Ultratemp - Calcium Silicate Insulation Boards
Ultratemp-AL is a carbon fiber reinforced calcium silicate board developed specifically for molten metal applications. Components machined from Ultratemp-AL are generally used for the movement, distribution, flow control, and casting of non-ferrous metals and their alloys. Ultratemp-AL board exhibits exceptional uniformity and dimensional stability, prolonging it's service life and minimizing costly replacement procedures. It's high strength, low shrinkage, and non-wetting properties ensure that components are highly resistant to breakage or cracking during casting and subsequent cleaning operations.
Monolithic Fiber Reinforced Calcium Silicate
Maximum Operating Temperature
Compressive Strength at 10% Deformation
Normal 4 % of Dry Weight
4 x 8
1.22 x 2.44
3/4, 1, 1.5, 2
Molten metal contact boards are heat treated calcium silicate formulations for use in conveying, containing and forming molten aluminum and other non-ferrous metals. Applications include holding furnace linings, tips for continuous casters, transition plates, hot top transition rings, plugs, baffles, skimmers, troughs, spouts, floats, distribution boxes, and filter boxes.
Ultratemp Machined Parts
Foundry Service & Supplies, Inc.
2029 South Parco Ave., Ontario, CA 91761
Site created by
ThomasNet Web Solutions
and powered by