All Categories > Industrial Products > Bricks & Mortars > Insulating Fire Bricks > Item # IFB-2600  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # IFB-2600, Insulating Fire Bricks



Foundry Service supplies Insulating Fire Brick (IFB) for use in applications from 2300ºF (1100ºC) to 3200ºF (1760ºC). Each type is formulated to meet specific thermal and physical requirements, and after firing is machined to precise tolerances. Made from high purity refractory clays and other ceramic raw materials, these IFB contain carefully graded organic filler which is burned out during manufacture to give a uniform, controlled pore structure. Standard sizes are 9" x 4.5" x 2.5" and 9" x 4.5" x 3", but custom sizes up to 24" x 9" x 3" can be produced without any cemented joints. Thicknesses up to 4 1/2", along with widths up to 12", allow a range of shapes and sizes for applications such as suspended roof modules. In addition to standard shapes including arches, wedges, soaps and splits, fabricated bricks are also available in special cemented or machined shapes. A large machine shop at the factory is capable of supplying accurate machined shapes of nearly any description. The unique large slab means that a finished shape will have fewer joints than shapes made from any other IFB manufacturer. IFB shapes with drilled holes, grooves, flycuts, tapers, radii cuts, skew planes, tongue and groove, notches and chord cuts are easily fabricated in any quality IFB.




Specifications  · Applications

Specifications

Composition

1.1% TiO2
39% SiO2

57% Al2O3

Density

50 lb/ft³
801
kg/m³

Maximum Operating Temperature

2600 ºF
1427
ºC

Cold Crushing Strength

260 psi
1.79
MPa

Modulus of Rupture

200 psi
1.38
MPa

Standard Brick Sizes

9 x 4.5 x 2.5 in
9 x 4.5 x 3
in


Applications
Recommended for use as primary hot face refractory linings or as back-up insulation behind other refractories in furnaces, flues, kilns and similar high temperature industrial equipment. In addition to the great number of standard sizes available, Insulating Fire Brick are also available in special cemented or machined shapes. A large machine shop at the factory is capable of supplying accurate machined shapes of nearly any description. The unique large slab means hat a finished shape will have fewer joints than shapes made from any other IFB manufacturer. IFB shapes with drilled holes, grooves, flycuts, tapers, radii cuts, skew planes, tongue and groove, notches and chord cuts are easily fabricated in any quality IFB. Thicknesses up to 4 1/2," along with widths up to 12", allow a range of shapes and sizes for Applications such as suspended roof modules.



twitterfacebookFlickrLinked InSite created by ThomasNet Web Solutions and powered by Navigator Platform
Foundry Service & Supplies, Inc. | Heat And Corrosion Resistant Industrial Insulation & Construction Materials