All Categories > Industrial Products > Bricks & Mortars > Hard Fire Bricks (High Density / Super Duty) > Item # Clipper-DP  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # Clipper-DP, Clipper-DP Super Duty Brick (3200ºF 42% Alumina Hard Brick)



Foundry Service supplies Hard "Super Duty" and "Medium Duty" Fire Bricks that are rated for superior strength in applications of over 3000ºF (1650ºC). They exhibit low shrinkage, excellent thermal shock resistance, and good resistance to alkali and carbon monoxide disintegration.




Specifications  · Applications

Specifications

Composition

2.3% TiO2
52.6% SiO2

42.2% Al2O3

Density

142 lb/ft³
2.27
g/cm³

Maximum Operating Temperature

3187 ºF
1753
ºC

Cold Crushing Strength

6300 psi
43.4
MPa

Modulus of Rupture

1350 psi
9.3
MPa

Apparent Porosity

15.3 %

Standard Brick Sizes

> 9 x 4.5 x 2.5 in
> 9 x 4.5 x 3
in
> 12 x 12 x 2
in
> 12 x 12 x 2.5
in
> 12 x 12 x 3
in
> 18 x 12 x 2
in
> 18 x 12 x 2.5
in
> 18 x 12 x 3
in
> 24 x 12 x 2
in
> 24 x 12 x 2.5
in
> 24 x 12 x 3
in


Applications
Typical applications include structural furnace components (walls, floors, roofs, etc.), furnace flues, furnace stacks, rotary kilns, graphitizing furnaces, charcoal furnaces, zinc galvanizing furnaces, carbon baking pit furnace fluewalls and headwalls, air heaters, combustion chambers, blast furnace bottoms, glass tank lower checkers, boilers, and cyclones.



 DOWNLOADS 

Data Sheet for Clipper-DP Super Duty Brick (3200°F 42% Alumina Hard Brick)
(PDF, 79KB)


twitterfacebookFlickrLinked InSite created by ThomasNet Web Solutions and powered by Navigator Platform
Foundry Service & Supplies, Inc. | Heat And Corrosion Resistant Industrial Insulation & Construction Materials