Firefly non-asbestos / non-ceramic fiber Millboards are used in a wide variety of industrial applications for high temperature thermal insulation and gaskets. Firefly Millboards exhibit exceptional wear resistance. This, coupled with performance at temperature and ease of cutting, makes Firefly the ideal solution to all high temperature gasketing problems. In addition, Firefly Millboard has set the standard for roller cladding material, designed to meet the most stringent requirements of glass and steel producers worldwide.
K-FAC 19 High Temperature board is a cost effective high strength mineral fiber board with outstanding thermal insulating efficiency. It is composed of mineral fiber and selected mineral
additives. An organic binder that will dissipate above approximately 475ºF is used for low temperature handling. On initial start-up. heat rise should not exceed 15ºF per minute to allow the binder to dissipate without excessive temperature rise. This will occur only on the first startup and will not adversely affect the insulation value. An inorganic binder system allows K-FAC 19 high temperature board to be used at service temperatures up to 1900ºF. The board should not be subjected to direct flame impingement as a hot face material. It's combination of ...
Handles more easily than gypsum panels and particle board
Outstanding versatility adapts to a variety of applications
Simplified component assembly saves time and money
Smooth, coated finish maintains tighter tolerance
Good sound control
Micore® Brand 300 Board from USG is a superior substrate for fabric and vinyl-covered wall panels, office dividers and tackboards. An excellent core for chalkboards. stove boards, and similar applications. MICORE Brand 300 Board offers outstanding residence. superior machinability. high "k" factor, heavy density and highest surface hardness of any MICORE board
THERMFIBER Industrial Board is an economical, semi-rigid, preformed mineral fiber insulation consisting of chemically inert mineral fibers bonded with a high temperature, thermosetting
binder. Industrial Board is available in nominal densities from 4 to 12 lb./cu. ft. and suitable for temperatures up to 1200ºF (650ºC).
THERMFIBER Industrial Blanket Insulation is an economical, flexible, preformed mineral fiber insulation consisting of chemically inert mineral fibers bonded with a high temperature, thermosetting binder. Industrial Blanket Insulation is available in nominal densities from 4 to 10 lb./cu. ft, and suitable for temperatures up to 1200ºF (650ºC).
Maxfire CMS-256 board is a, rigid, self-supporting Calcia/Magnesia Silicate fiber insulation board rated for continuous use up to 1800ºF. It provides stability and resistance to chemical attack, and is unaffected by incidental contact with oil or water. Exceptions include hydrofluoric acid, phosphoric acid and strong alkalies (i.e. NaOH & KOH). CMS-256 is inorganic (meaning no smoking on initial heat-up) and is ideal for hot face furnace linings, backup insulation, and trough linings for non-ferrous metals. CMS-256 is ceramic fiber free and is therefore exonerated from any carcinogenic classification due to the material's enhanced solubility in bodily fluids.